Air Conditioning, Heating, and Indoor Air Quality Services in Nashville, TN
With over 20 years of experience working on air conditioning, heating, and indoor air quality systems, Precision Air has you covered in Nashville, TN.
When you choose Precision Air, you are choosing comfort, everytime!
Call to schedule an appointment with us today.
Local Reviews
for Nashville, TN
Powered by Recommend MeOur Reviews by City
Great customer service
Chris - Nashville, TN
Great service. Nice and friendly
Mary - Nashville, TN
Friendly and professional
John - Nashville, TN
Friendly and professional
Waiting for test results
Mark - Nashville, TN
Austin did a very thorough job of servicing our HVAC unit. He also tested the air quality in our home and explained that we could benefit from an additional piece of equipment. However, we are still waiting to receive a copy of the test results so we can decide whether to proceed with adding the recommended equipment. We were also pleased that Austin arrived on time.
HSR
Harold - Nashville, TN
Excellent-thorough service
Excellent Service
Laura - Nashville, TN
Thank you!
Precision service
Betty - Nashville, TN
Jay is truly fantastic and very knowledgeable in regards to geo-thermal systems.
Professional, on time and followed covid safety measures
Patsy - Nashville, TN
Excellent HVAC service
Matthew - Nashville, TN
I recently had some maintenance and repair work performed on my HVAC system by Precision Air. They had been referred by a top contractor, and they performed excellent work at a very reasonable price. Highly recommend.
Jay was the best tech Precision ever sent me - he was thourough, professional and kind. He went above and beyond by helping me with a related air qua
Sheila - Nashville, TN
Great service
Phil - Nashville, TN
Great service!
Dara - Nashville, TN
Very professional
Pinson - Nashville, TN
Good service
Great and knowledgeable as always
Michael - Nashville, TN
Excellent technician
Andi - Nashville, TN
good work
Peter - Nashville, TN
Good service
Mal - Nashville, TN
Professional and on time service by Precision !
Patricia - Nashville, TN
Austin was courteous and thorough during his visit to service our cooling and heating system. We appreciated his advice.
Excellent service. Solid expertise. Great price.
Trevor - Nashville, TN
Great service
Imogene - Nashville, TN
Austin W.
Preformed tune up on HVAC systems. This will fall under the existing seasonal tune up (heating). Inspected all fan motors, compressors, contractors, capacitors, coils, pumps, etc. tested thermostat operation, and checked temperatures of supply and return air. Checked refrigerant levels and confirm system capacity. Cleaned all burner and ignition assemblies. Tested all safety controls. Cleared drain lines and run tested equipment operation for at lest 10 minutes
Jay P.
Replaced zone control panel and added low ambient controls to air conditioner
Jay P.
Zoning issues, blower running nonstop
Jeremy H.
Replaced floor grill
Jeremy H.
Two system heating maintenace
Jeremy H.
Three system maintenance plus filter change
Austin W.
Performed maintenance on a 3 geothermal package heat pump. Performed waterside diagnostics and tested results with factory specifications. Inspected loop pumps, blower motor assembly, and evaporator coil. Cleared drain line and checked loop pressures. Tested electrical components such as motors and capacitors. Tested thermostat operation. Tested capacity of the equipment as well as suppply and return air temperatures. Found that living room unit low refrigerant. Add 3lbs of 410 found leak in evap
Jay P.
Heating maintenance, found bad high limit and replaced during maintenance. System is back up and running efficiently at this time.
Jay P.
Heat maintenance
Austin W.
Perform heating maintenance on 1 gas package, 2 heat pumps, 1 heat pump mini.Inspected all fan motors, compressors, contractors, capacitors, coils, pumps, etc. tested thermostat operation, and checked temperatures of supply and return air. Checked refrigerant levels and confirm system capacity. Cleaned all burner and ignition assemblies. Tested all safety controls. Cleared drain lines and run tested equipment operation for at lest 10 minutes. Systems are operating properly at this time. Need to quote installing a inline 6 inch damper son room. Also need to quote surge protector on the 2 split systems and mini split.
Austin W.
Perform heating maintenance on 1 gas package, 2 heat pumps, 1 heat pump mini.Inspected all fan motors, compressors, contractors, capacitors, coils, pumps, etc. tested thermostat operation, and checked temperatures of supply and return air. Checked refrigerant levels and confirm system capacity. Cleaned all burner and ignition assemblies. Tested all safety controls. Cleared drain lines and run tested equipment operation for at lest 10 minutes. Systems are operating properly at this time. Need to quote installing a inline 6 inch damper son room. Also need to quote surge protector on the 2 split systems and mini split.
Jay P.
Water heater went out. Relit pilot and confirmed proper operation.
Austin W.
11/16/20 alw serial # 160800098 Found that unit was locked out on no communication. Found that safety switch was tie into the communication line. Condensate pump was bad. Replace condensate pump and check system operation in heating and cooling.
Matthew J.
Heating Maintenance completed. Checked refrigerant on 2nd floor system.
Matthew J.
Completed heating maintenance on 1 system.
Matthew J.
Installed Air Scrubber into whole house HVAC system.
Matthew J.
Geothermal heating Maintenance
Matthew J.
Geothermal Heating Maintenance
Jay P.
No heat, replaced bad gas valve and confirmed proper system operation.
Jeremy H.
One system maintenance on a york gas pack
Jay P.
Geothermal Maintenance
Jeremy H.
One system maintenace daikin gas pack
Jeremy H.
One system geothermal maintenance 7 series water furnace
Matthew J.
Heating Maintenance on 4 systems
Austin W.
Perform heating maintenance on one split heat pump. 2 of 2. Checked capacitors, contractors, electrical connections, and high and low voltages in and out of system. Checked refrigerant pressures and temperatures along with air flows and delta t reading. Check cleanliness of condenser coils and cleaned unit along with inspection of evaporator coil. Ran system in the heating mode for at least 10 minutes.Systems are operating properly at this time.